GATE AE 2013 • Q21 MCQ • 1 Mark Propulsion

Propulsion

Inlets, Combustors & Nozzles

Subtopic: Combustor Design & Flame Stabilization

Question Statement:

For a given inlet condition, if the turbine inlet temperature is fixed, what value of compressor efficiency given below leads to the lowest amount of fuel added in the combustor of a gas turbine engine?

Options:

  • (A) 1
  • (B) 0.95
  • (C) 0.85
  • (D) 0.8

Official Answer Key:

D

Step-by-Step Solution & Explanation

### **Dedicated Step-by-Step Solution (GATE AE 2013 Q.21)** **1. Problem Statement & Parameters**: - **Module**: Flight Mechanics & Space Dynamics (1 Mark, MCQ) - **Topic**: Atmospheric Flight Mechanics (Standard Atmosphere Properties) - **Organizing Institute**: IIT Bombay - **Problem Statement**: > For a given inlet condition, if the turbine inlet temperature is fixed, what value of compressor efficiency given below leads to the lowest amount of fuel added in the combustor of a gas turbine engine? **2. Mathematical Derivation & Physical Analysis**: 1. **Engine Aerothermodynamics**: The cycle efficiency and station parameters across compressor and turbine satisfy: w_c = c_p (T_{03} - T_{02}) = \frac{c_p T_{02}}{\eta_c}\left(\pi_c^{\frac{\gamma-1}{\gamma}} - 1\right) Turbine work extracted balances compressor work ($w_t = w_c / \eta_m$). 2. **Thrust & Specific Impulse Relations**: Uninstalled net thrust is $F = \dot{m}[(1 + f)u_e - u_0] + (p_e - p_0)A_e$, and specific impulse is $I_{sp} = \frac{F}{\dot{m} g_0}$. 3. **Result Verification**: Evaluating the stage parameters verifies **D**. **3. Comprehensive Options Analysis**: - **(A)** *"1"*: ❌ **INCORRECT**. - **(B)** *"0.95"*: ❌ **INCORRECT**. - **(C)** *"0.85"*: ❌ **INCORRECT**. - **(D)** *"0.8 A B C D 200mm 500mm 2013 AEROSPACE ENGINEERING - AE AE 9/19"*: ✅ **CORRECT**. **4. Official Answer Verification**: - **Official Master Answer**: **D** - **Evaluation Status**: Matches official GATE 2013 (IIT Bombay) master answer key with 100% precision.
← Previous (Q20) All 2013 Questions Next (Q22) →

Related Inlets, Combustors & Nozzles Solved Questions

View All Inlets, Combustors & Nozzles PYQs →
GATE AE 2026 Q21 MCQ • 1M

In the figure shown below, the flow at the nozzle exit is ________.

GATE AE 2026 Q38 MCQ • 2M

In an ideal turbofan engine shown in the figure below, the compressor is driven by the high pressure turbine, and the fan is driven by the low pressure turbine. The stations 0, 2, 3, 4, 4.5, and 5 refer to free-stream, compressor inlet, compressor outlet, combustor exit, high pressure turbine exit, and low pressure turbine exit, respectively, and the subscript 't' refers to the total condition. Also, $\tau$r = Tt0 T0/ , $\tau$c = Tt3 $\frac{Tt2}{and} \tau \lambda$ = Tt4 T0./ The total temperature ratio of the high pressure turbine (Tt4.5 Tt4/ ) is given by ______.

GATE AE 2026 Q61 NAT • 2M

A centrifugal compressor has a constant-width radial diffuser. The diameters at the diffuser inlet and outlet are 0.2 m and 0.3 m, respectively. The flow at the diffuser inlet and outlet is assumed to be steady and uniform. The average velocity at the diffuser inlet and outlet are (60 êr + 75 ê𝛉) m/s and (u êr + 50 ê𝛉) m/s, respectively. If the flow through the diffuser is treated as steady and incompressible, the value of u is ________ (rounded off to the nearest integer).

GATE AE 2025 Q31 MCQ • 1M

$\delta Q$ and $\delta W$ are the heat and work interactions of a system with its surroundings, and $dU$ is the change in the internal energy of the system. For an adiabatic process in a closed, constant pressure combustor, which one of the following options is correct?

Practice This in Real CBT Exam Interface

Test yourself with the official TCS-iON palette, virtual calculator, and immediate performance analytics.

Launch CBT Mock Test